Smartgen Controller Genset Controller HGM6110U

HGM6100U series automatic controller, integrating digital, intelligent and network techniques, is used for automatic control and monitoring system of genset. It can carry out functions of automatic start/stop, data measurement, alarm protection and three “remote” (remote control, remote measure and remote communication). The controller uses LCD display, optional display interface including Chinese, English, Spanish and Russian with easy and reliable operation. HGM6100U series automatic controller uses micro-processing technique which can achieve precision measurement, value adjustment, timing and threshold setting etc.. All the parameters can be configured from front panel or use programmable interface (or RS485 interface) to adjust via PC. It can be widely used in all types of automatic control system for its compact structure, simple connections and high reliability.

2 PERFORMANCE AND CHARACTERISTICS
HGM6100U controller has four variants: HGM6110U/6110UC: Automatic Start Module, it controls generator to start/stop by remote start signal; HGM6120U/6120UC: Based on HGM6110U/6110UC, it adds mains AC monitoring and mains/generator automatic switching control (AMF), especially suitable for the automation system composed by mains and genset. Note1: HGM6110UC/6120UC has RS485 port, HGM6110U/6120U without. Note2: HGM6110UC/6120UC is taken as an example to describe in this manual.
 132*64 LCD display with backlight, optional language interface (Chinese, English, Spanish and Russian), push-button operation;
 Acrylic screen, improved wearable and scratch resistance property;
 Silica-gel panel and keys can well adapt to higher and lower temperature;
 With RS485 communication port, can achieve “three remote” functions via MODBUS protocol;
 Adapt to 3P4W, 3P3W, 1P2W and 2P3W (120V/240V), 50Hz/60Hz AC power system;
 Can measure and display 3 phase voltage, 3 phase current, frequency, power parameter of mains/gens;
Mains Generator Line voltage (Uab, Ubc, and Uca) Line voltage (Uab, Ubc, and Uca) Phase voltage (Ua, Ub, and Uc) Phase voltage (Ua, Ub, and Uc) Frequency HZ Frequency HZ Load Current IA, IB, IC Active power KW Reactive power KVar Apparent power KVA Power factor PF Generator accumulated energy kWh
 Mains have functions of over/under voltage and lack of phase; Gens have functions of over/under voltage, over/under frequency and over current;
 Precision measure and display of parameters about engine,